FA Series
Technical Specs
Where it is not specified ratings are for all models.

CONTINUOUS OUTPUT NOMINAL POWER *:
[both ch. driven from 20 hz to 20 Khz; THD < 0.2%]
*These power levels have been measured by very tight and severe Joule's law phisical effects, it is not possible to directly compare these values with declared values of other brand.
FA460x 4x 60W/4ohm @14V
4x100W/2ohm
@14V
2x 200W/4ohm @14V (bridge)
 
 
FA900x 1x 300W/4ohm @14V 1x 550W/2ohm @14V 1x 900W/1ohm @14V (1%THD)

FA460x:
 



FA900x:

  • 12 db/oct low-pass and 12 db/oct high-pass filters built-in, separately turn-on onto each ch. pair
  • separately adjustable from 50 Hz to 5 Khz
  • straight by-pass allowing full-range mode
     
  • 24 db/oct low-pass cross-over built-in, adjustable from 40Hz to 220 Hz
  • Adjustable phase from 0° to 180°
  • Adjustable bass-boost from 0 to +9Db
  • Adjustable subsonic filter from 10Hz to 50Hz
  • Remote level control knob

THD: less than 0.2 % until 1° clipping [20 hz to 20 Khz]
FREQUENCY RESPONSE [-3Db]: at 5 hz and more than 75 Khz (nominal power into 4 ohm)  FA900x: within 250Hz
INPUT IMPEDANCE: 10 Kohm
INPUT SENSITIVITY: max 300 mVrms; min 5 Vrms
STEREO SEPARATION: 60 Db at 1Khz
DUMPING FACTOR FA900x: >200
SIGNAL TO NOISE RATIO: > 110 Db "A" weighted - FA900x: 90 Db "A weighted"
CURRENT CONSUMPTION [at 14 Vbatt]:
FA460x idle 4 ohm (stereo) 2 ohm (stereo) 4 ohm (bridge)

nom. power

0.6 A 22 A max 30 A max 30A max
FA900x idle 4 ohm 2 ohm 1 ohm

nom. power

1 A 27A max 50A max 65A max
 
PROTECT AT:
  • short on speakers outputs
  • battery voltage < 9 V
  • battery voltage > 15 V
  • thermal shutdown at 70° C
  • fully muted at turn on and off
  • FA900x: relay on speakers output
DIMENSIONS AND WEIGHTS:
FA460x (255 x 162 x 51) mm 2.7 Kg
FA900x (265 x 162 x 51) mm 3 Kg

Features could change without notice